Weekly Maintenance

xtreme-maintenance-1
Check Inner Water Strainer
  • Turn off Chiller.
  • Remove the bottom red “Inlet” Chiller Hose from the Chiller and elevate to prevent water flow. Remove Water Strainer Cover by twisting counterclockwise and check Inner Water Strainer for debris; remove any foreign materials present. Use a brillo pad or rough sponge if necessary. Check the Strainer O-ring at the base of the threads is present and free from damage before reinstalling Water Strainer Cover.
Check the Water Filter
  • To access the Water Filter, turn the Lower Water Filter Housing to the left if facing the back of the Chiller. Check the Water Filter condition by comparing to the diagram below. If the condition is in the “Replace” range, or if the flow reading on the Control Panel reads less than 13.0 L/min, then replace the filter with a new one. When changing the filter, empty the Lower Water Filter Housing fully and refill up to the top with fresh water.
  • Ensure the Filter Housing O-ring in the Upper Water Filter Housing (white part) is present and free from damage before reinstalling the filter housing.